1021427988-1.jpg1021427988-1.jpg

SPORTS CLASSIC OIL FILLER WITH TWIN WEBER IDF AIR FILTER FOR TYPE 1 ENGINE 40HP~1600CC UP

$545.00

Ships in 2 weeks

Description

The Oil Filler ONLY WORKS with VW Factory Alternator Stand.

For aftermarket alternator stand, such as MST, please email us before ordering.

Complete Bolt On Kit for VW Beetle, VW Bus, VW Karmann Ghia and Type 3s.

Sport Classic Oil Filler with Twin Weber IDF Air Filter for Type 1 Engine 40HP~1600cc up including:

  • 1 x Oil Filler for VW Type 1 Engine, INOX-356-0
  • 2 x Weber Air Filter Cleaner for IDF carburetor

OIL FILLER —

The INOX 356 OIL FILLER, for VW Type 1 engine in Porsche 356 Style Oil Filler, the compact design to give a VW type 1 engine an extra breathing and also easy for oil filling. The Filler Neck is sited on the CNC 6061 Aluminum Flange secured by Hex key on the alternator stand. The Oil Filler Tube (the Road Vent) is vented to factory Road Vent location.

 

The Hex Key bolt is using standard factory thread M32 x P1.5 into alternator stand for all VW Type 1 Engine.

 

With internal chamber design to separate the oil and air, which allow air to travel freely exit to atmosphere.

  • The INOX 356, Porsche 356 Style Oil Filler is made by 100% Stainless Steel.
  • with 0.4L volume gives compact extra Air Breather room for the engine upto 95 BHP.
  • CNC Stainless Steel Hex key to replace the factory oil filler nut.
  • CNC 6061 aluminum flange.
  • Road vent pipe at inner diameter 17mm (O.D. at 19mm).
  • For 40HP ~ 1600cc and Up 3 pieces VW Type 1 Engine.

Weber IDF Air Filter — Twin Weber Air Filter for IDF Carburetors.

Features:

  1. Fits on Weber IDF 40 / 44 /48 carburetors.
  2. Made by #304 Stainless Steel.
  3. The ??5 Bolts ??Locking on Top Plate, retain classic style. Maximum tighten to 5 N.M. on all bolts.
  4. Build-In Rivet, to the best details ever.
  5. Build-in High Breathable Polyfoam for maximum air flow, allow the air to pass freely without drop in pressure.
  6. also can be fitted with other different air filter in 3 1/2 inch hight.
  7. The inner 4 tubes are threaded, and link for upper and lower stainless steel plates. The direction of the tubes are shorter Hex screw on top and longer at bottom.
  8. There is very little gap(s) between the inner tubes and the stacks, adjust is if necessary. If there is no gaps, then grind little off on the stacks.
  9. Filter Size measurement: L 18cm, W 11.8cm, H 8.6cm

Dellorto carburetor please also order carbutor spacer at link below, sold per piece : http://carreraparts.com.tw/index.php/weber-air-fil…

* The import tax may be applied depending on each case *

Additional information

Weight 15 lbs
Dimensions 18 × 11 × 11 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.