UNDERFLOOR OIL COOLER KIT, TYPE 3 -7/68 WITH SWING AXLE

UNDERFLOOR OIL COOLER KIT, TYPE 3 -7/68 WITH SWING AXLE

Keeping the oil temperature within the green range ( sub 200 degrees ) is very important in a performance engine.

With this mounting kit, a cooler can be attached to the torsion bar tube with little effort. This Oil cooler is all  you will need to maintain sub 200 degree oil temps, when used with the optional fan kit.

If the original oil cooler remains in the vehicle, an additional oil cooler is sufficient even for larger engines.

The set can be used on both sides on vehicles with a swing axle, with or without a stabilizer and on vehicles with wishbone axles. Installation instructions are of course included with each set.

The kit includes mounts, stainless steel shroud with louvered venting and a 72 plate oil cooler with detailed instructions.

Note:  The kit does not include any connection fittings or hoses. These must be ordered separately.

Unfortunately, the CAGERO electric fan does not fit for attachment to type 3.