Underfloor oil cooler kit, TYPE 1 Beetle 68′ & later for 65mm torsion bar (mounting kit / cooler / sheet metal)
Keeping the oil temperature within the green range is very important in a performance-enhanced engine.
With this mounting kit, a cooler can be attached to the torsion bar tube with little effort. One set on the left side of the vehicle is sufficient for up to 100 HP. For engine outputs over 100 HP, we recommend installing a cooler on the right pipe.
If the original oil cooler remains in the vehicle, an additional oil cooler is sufficient even for larger engines.
The set can be used on both sides on vehicles with a swing axle, with or without a stabilizer and on vehicles with wishbone axles. Installation instructions are of course included with each set.
The kit includes mounts, stainless steel shroud with louvered venting and a 36 row oil cooler with detailed instructions.
Note: The kit does not include any connection fittings or hoses. These must be ordered separately.