Electrical / Ignition
Racepak Data Recorder
The affordable V300SD data recorder is the most common recorder for Pro Stock, Pro Modified and many of the Sportsman classes. In its base configuration, the V300 monitors six parameters (Engine RPM, Driveshaft RPM, Accel G, Lateral G, Battery Volts and a 12-volt event), but it can be expanded to monitor up to 67 channels of data to meet the needs of most users. The V300SD can sample data as quickly as 1000 times per second.
Uploading recorded data to your computer is done via a SD memory card, which provides you with hours of recording time and the ability to store many runs prior to uploading the data. The V300SD also has multiple methods of displaying monitored data in real time. When linked by serial cable to your PC you can view all recorded functions in either graph format or on 8 virtual gauges while the vehicle is running. Any monitored function can also be displayed in real time on Racepak’s optional Intelli-Gauges or either the IQ3 or Ultra Dash (UDX).
Item Number Description Price 37-200-KT-V300SDL V300SDL Kit W/ Datalink Lite Software 1,822.00 37-800-MB-V300-125 V300 Roll Bar Mount Brackets 1.250″ 104.00 37-800-MB-V300-150 V300 Roll Bar Mount Brackets 1.500″ 103.00
IQ3 Dash Display
· Display up to 28 inputs via 4pages
· Blue backlight
· Gear Indicator
· 8 user defined alarms with warning text and lights
· User defined 5-character sensor input names
· User defined shift lights
· Shielded, low luster display for sunlight viewing
· Metric / Imperial Configurable
The IQ3 Display Dash can be utilized with any of Racepak’s V-Net data loggers, providing a compact, fully programmable LCD digital dash for use in a variety of motorsports.
Progressive shift lights, eight warning lights and all inputs are easily programmable through the DataLink II software.
A single V-Net cable is routed to the rear of the dash, providing power and access to all sensor information transmitted to the data logger. Up to 24 different sensor inputs may be displayed on a total of four programmable pages. The blue backlight provides excellent viewing for both daylight and nighttime usage, while the low luster display screen provides excellent protection against scratches.
Item Number Description Price 37-250-DS-IQ3 IQ3 Display Dash 676.00
Analog V-Net Modules with Sensors (pre-programmed)
These per-programmed analog function module and sensor combinations are ready for plug-and-play installatic V-Net Cable.
(Note: All pressure and vacuum modules have 48” pigtail cable between the V-Met module and the sensor.)
Item Number Description Price 37-220-VP-PT-BST75 Manifold Pressure (Boost) MOD W/Sensor 0-75 PSI 260.00 37-220-VP-PT-CP15 Fuel PSI Module W/Sensor 0-15 PSI 260.00
Item Number Description Price 37-220-VP-PT-BVAC Pressure/VAC Module W/Sensor 15-0-30 260.00
(Note: pigtail cable lengths are shown in parenthesis.)
Item Number Description Price 37-220-VP-TC-HEADL Left CYL Head Temp Module W/Sensor 0-600F, (36) 213.00 37-220-VP-TC-HEADR Right CYL Head Temp Module W/Sensor 0-600F, (36) 177.00 37-220-VP-TR-OIL Oil Temp Module W/Sensor, (48) 177.00 37-220-VP-TC-MANIF Manifold Temp Module/Sensor TC, (36) 260.00
Exhaust Gas Temperature/Cylinder Bank Sets
Item Number Description Price 37-220-VP-TC-1234 4 Channel EGT Box 1234 With 1/4″ Probes 749.00
Wide Open Throttle Sensors
Wide open throttle event switches are used on Holley carburetors to verify when the carburetor is at full throttle and the throttle blades are wide open. Two styles of mounting brackets are avalible. Both bolt directly to the side of the carburetor main body. Monitoring WOT requires an available V-Net channel
Item Number Description Price 37-800-MB-WOT-750 Bracket Only, WOT, Holley 750 Style 23.00 37-800-MB-WOT-SWC Bracket With Switch & Pigtail Cable, Dominator Style Carb 40.00
Item Number Description Price 37-220-VP-WOTEVENT VNet MOD, Wide Open Throttle 125.00
Zero Crossing Sensor
This non-powered sensor is designed for monitoring magnetic pulses. It must be used with an RPM input designed for zero crossing sensor. Used as the clutch RPM or Front Wheel RPM Sensor on V-series and 2001 and newer Pro Series recorders.
Item Number Description Price 37-800-SS-ZX-3 Zero Crossing RPM Sensor, 3-Pin, 3/8″ Dia 270.00
These aluminum split collars provide a mounting platform for the magnets that are used to trigger the sensor when monitoring the revolutions of a axle. Each collar is approximately .375” wide and houses two magnets which are located 180° apart.
2 Magnet Collar
Item Number Description Price 37-800-CL-2M-212 Split Collar, 2.125″ID, (2 1/8″) 47.00
8 Magnet Collar
Item Number Description Price 37-800-CL-8M-2125 Split Collar, 2.125″ ID, 8 Magnet 83.00
These are the rare earth magnets that are currently used in clutch input shaft, the split collars shown above or with some front wheel RPM applications. Each magnet measures .250” OD x .200” in length. North end magnet is painted yellow for easy identification.
Item Number Description Price 37-800-MG-SM-.25 Magnet Only, Rare Magnet, Single 9.00
The Power Grid 7-Series Ignition System uses a 32 bit micro controller and windows based software program. All ignition data is captured on a micro SD card for easy reviewing & storage. Packs higher output than current programmable units. Complete with USB connections and can be used with any MSD Ignition
Item Number Description Price 37-MSD-6530 Digital Programmable 6AL-2 380.00 37-MSD-7720 Power Grid Ignition Only 445.00 37-MSD-7730 Power Grid Control Only 399.00 37-MSD-7740 4-Connection CAN Bus Hub 76.00 37-MSD-7751 Power Grid Launch Control 175.00 37-MSD-7786 CAN Bus Harness 72″ 46.00 37-MSD-8950 RPM Activated Switch 105.00
8485 Distributor, VW Billet
6061-T6 billet aluminum VW distributor. Acceptable for crank trigger use, naturally aspirated, or turbo locked-out.
Item Number Description Price 37-MSD-8485 Distributor, VW Billet 291.00
8261 Ignition Coil, HVC-2, 7 Series Ignition
HVC-2 Coil produces 45,000 volts @ 2amps with minimal OHMS of primary resistance. For use with MSD 7 Series Ignitions.
Item Number Description Price 37-MSD-8261 Ignition Coil,HVC 2, 7 Series Ignition 206.00
31939 Wire Set, Super Cond., VW Type 1
VW 8.5mm spark plug wire set with cut to fit coil wire.
Item Number Description Price 37-MSD-31939 Spark Plug Wire Set 61.00
Electrical Wire Kit
Item Number Description Price 37-500-FWH Complete Factory Wire Harness 249.00 37-500-HLDR Hi/Low Dimmer Relay 51.00 37-500-FR Flasher Relay 61.00 37-500-HLS Head Light Switch 37.00
Carbs/Pumps/Filters & Acc.
Item Number Description Price 45-500-FLPPHB Holley Fuel Pump: Black 203.00 45-500-FLPRHB Holley Billet Fuel Pressure Regulator 99.00 45-500-FLBL Braided Fuel Lines, -8, Per Ft 5.00 55-500-BL890HE -8, 90 Degree Hose End 16.00 23-500-4651-00-2 6″ Cylindrical In-Line Race Fuel Filter 08 AN – Black 59.89 23-500-4151-08-1 -8 Inline Fuel Filter Blue 27.00 45-900-H770T Holley 770 Turbo Prepped Carb 780.00 45-900-H750TE85 Holley 750 E85 CFM, Turbo Prep 1092.00 45-900-H750TB Holley 750 CFM, Turbo Prepped Carb, Black 884.00 45-900-H650T Holley 670 CFM, Turbo Prepped Carb 780.00 45-900-H850T Holley 850 CFM, Turbo Prepped Carb 884.00 40-500-TLCL8 Standard Throttle Cable, 8ft. 120.00 40-500-TLCLB Throttle Cable Return Springs 13.00 40-500-TLCLRS Throttle Cable Bracket, (Red, Blue, Raw Finish) 100.00 23-500-1045-08-2 -08 45 Degree Swivel Hose End – Black 16.99 23-500-1090-08-2 -08 90 Degree Swivel Hose End – Black 16.99 23-500-1000-08-2 -08 Straight Hose End – Black 8.79 23-500-1045-06-2 -06 Swivel Hose End – Black 13.99 23-500-1000-06-2 -06 Straight Hose End – Black 6.89 23-500-816-06-06-2 -06 Straight Adapter 3/8 NPT Male- Black 4.17 23-500-9194-06-06-2 -06 Male to 3/8 NPT Male – 1/8 NPT – Black 12.53 23-500-5030-06-2 -06 To 7/8 x 20 Carb Adapter – Black (2 pcs) 12.64 23-500-932-06-2 -06 3/8 NPT Socket Head Pipe Plug – Black (2 pcs) 10.79 23-500-816-08-06-2 -08 Straight Adapter 3/8 NPT Male – Black 4.17 23-500-230-08-20 -08 Proseries Black Fuel Line 20 Feet Length 115.00 23-500-230-06 -06 Proseries Black Fuel Line 6 Feet length 35.05 23-500-5001-15-3 Liquid Filled Pressure Gauge 1/8 NPT Inlet 15 PSI Plain – Black 24.80 40-500-CS12 Carburetor Studs, 1/2″ (w/Nuts) 12.00